Horizontal Rebar Bending Center
1.Noise Reduction: Anti-noise roller table for safety and environmental protection.
2.Precise Positioning: No-backlash technology ensures accurate, silent operation.
3.Stability: Stainless steel panel design for stable bending of curved steel bars.
4.Efficiency: Automatic blanking mechanism saves time and effort.
5.Convenient Operation: Crank lifting and transfer system for easy handling.
6.Safe Handling: Inclined face structure for safer loading and unloading.
Product Description
Horizontal rebar bending center features an anti-noise transmission roller table design, providing enhanced safety and environmental protection. The main machine adopts no-backlash meshing technology for accurate positioning and noise reduction. The large stainless steel panel design ensures greater stability when bending curved steel bars. The automatic blanking mechanism saves time and effort, while the crank-type steel bar lifting and transferring system offers maximum convenience for the operator. The inclined face structure facilitates safe and easy loading and unloading operations.
Parameters
Bending bar diameter | 10mm | 12mm | 14mm | 16mm | 18mm | 20mm | 22mm | 25mm | 28mm | 32mm | 40mm | 50mm | |||
Bending quantity | 6 | 6 | 5 | 5 | 4 | 3 | 3 | 2 | 1 | 1 | 1 | 1 | |||
Angular bending velocity | 48°~72°/s | ||||||||||||||
Moving speed of the bending machine | 0.5~1m/s | ||||||||||||||
Power supply | 380V 50Hz | ||||||||||||||
Total power | 27.7KW | ||||||||||||||
Actual power consumption | 12kw/h | ||||||||||||||
Maximum bending Angle | Upbend：0~180° | Minimum curved edge size | Φ12mm | ||||||||||||
Upbend：0~-120° | Φ1100mm | ||||||||||||||
Minimum length of bent edge | 80mm | Maximum curved edge size | 10000mm | ||||||||||||
Minimum bending bar length | 1250mm | ||||||||||||||
Compound bend (up or down) | Φ10~32mm | Single bend | Φ36~50mm | ||||||||||||
Operating Instructions
1. Check whether the performance is good before using the equipment, and whether the workbench and the bending center of the CNC steel bar are kept level.
2. Before work, prepare each mandrel tool stop, adjust the mandrel forming shaft, iron stop shaft, etc.
3. Check the mandrel block, turntable, etc., whether there is damage, such as problems, timely treatment.
4. Before processing, the CNC steel bar bending center should be idled for a few minutes before the steel bar can be bent into the gap fixed in the turntable.
5. The other end of the steel bar needs to be pressed by hand, and the fuselage is fixed to ensure that the side that blocks the steel bar can be started.
6. When machining steel bars in the CNC steel bar bending center, it is forbidden to change the diameter, number of bars, speed, etc.
Factory Show
Honors and Qualifications
